{"id":569,"date":"2014-07-29T06:30:35","date_gmt":"2014-07-29T06:30:35","guid":{"rendered":"https:\/\/www.p-brane.com\/nm\/?p=569"},"modified":"2014-07-29T06:30:35","modified_gmt":"2014-07-29T06:30:35","slug":"raspberry-pi-sketchup-3d-models","status":"publish","type":"post","link":"https:\/\/www.p-brane.com\/nm\/raspberry-pi-sketchup-3d-models\/","title":{"rendered":"Raspberry Pi Sketchup 3D models"},"content":{"rendered":"<p>I&#8217;m trying to make a case for my Raspberry Pi (RPi) with an Adafruit PiTFT 2.8 inch display and was modeling it in Sketchup 8.\u00a0 I made a simple model of the PiTFT display and then started looking for some 3D Sketchup8 models of the RPi Model B with 512MB of memory from the Sketchup 3D Warehouse to save some time. Connectors between the RPi and the PiTFT display did not fit quite right. A few measurements showed that some of the parts and boards were the wrong size.\u00a0 My list of models investigated so far is shown below.<\/p>\n<ul>\n<li>\n<p id=\"title\">Raspberry Pi &#8211; Model B Rev2 by Gandy file Raspberry-Pi&#8212;Model-B-Rev.skp: The GPIO pins are spaced incorrectly at 2.4 mm and should be spaced at 2.54 mm. The board length is 86 mm and should be 85 mm.<\/p>\n<\/li>\n<li>\n<p id=\"title\">Raspberry Pi Rev 1 by Billmar file RaspberryPi_FN120401823.skp: The board size and GPIO pin spacing seems to be good. For the few things I measured, this is the most accurate model so far. As this is model is for Rev 1 of the board, it does not have the mounting holes I&#8217;m looking for.<\/p>\n<\/li>\n<li>\n<p id=\"title\">raspberry pi 3d model B 512 by Clavis file\u00a0RaspberryPi.skp: The board size measures 81.9 mm but should be 85 mm. The GPIO pin spacing is 2.4 mm and should be 2.54 mm.<\/p>\n<\/li>\n<\/ul>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>I&#8217;m trying to make a case for my Raspberry Pi (RPi) with an Adafruit PiTFT 2.8 inch display and was modeling it in Sketchup 8.\u00a0 I made a simple model of the PiTFT display and then started looking for some 3D Sketchup8 models of the RPi Model B with 512MB of memory from the Sketchup [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,52],"tags":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/posts\/569"}],"collection":[{"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/comments?post=569"}],"version-history":[{"count":3,"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/posts\/569\/revisions"}],"predecessor-version":[{"id":572,"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/posts\/569\/revisions\/572"}],"wp:attachment":[{"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/media?parent=569"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/categories?post=569"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.p-brane.com\/nm\/wp-json\/wp\/v2\/tags?post=569"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}